TM-250 - AC Power Management Controller

TM250 AC Power Management Controller Product Info Page

TM-250 Picture

The TM-250 monitors AC power as-reported from the transfer switch directly (RV-C) or via the TM102. It then sheds AC loads to maintain a maximum on each leg. Devices are controlled through external relays. Loads are shed in a configurable order, and restored in the opposite sequence. The unit also supports up to three temperature sensors. The TM250 can be configured through the Omniscope diagnostic tool.

Note: If transfer switch data are missing, all loads will be shed; disable shedding temporarily (until fixed.)