DB-200 - H-Bridge Driver

DB-200 Product Info Page

DB200_x600w.jpeg

Description
The DB-200 is similar to the original DB-100 DC-switching unit. This unit however uses H-Bridge(s) to drive up to six DC motor loads directly. Nominal max is 4Amp per motor, 15Amp trip. These, like the DB100, are controlled via 'digital circuit breaker' progammability. Initially, this is on a design-by design basis within the house systems of a coach or towable.

Communication are via the ubiquitous RV-C CAN-BUS found in modern coaches or those retrofitted for this. Programming may be done serially or by USB.

DB-200 Part Numbers
tbd